дѺҹҪҵ

дѺҵ ûЪдѺҹҪҵ ûЪдѺҵ ªдѺҹҪҵ

 

ŧҹԨ·㹡ûЪԪҡдѺҹҪҵ
International Conferences
 

2012 2011 2010 2009 2008 2007 2006 2005 2004 2003
 

2011

  1. Prukvilailert, M. and Wangskarn, P. Energy Conservation Potential in SME's of Thailand IEEE International Conference on Smart Grid and Clean Energy Technology,  27-30 September 2011, Chengdu, China.

  2. Wangskarn, P. and Prukvilailert, M."Evaluation the Designated Government Buildings Promotion in Thailand", International Conference on Smart Grid and Clean Energy Technologies,  27-30 September 2011, Chengdu, China.

  3. Sanewong Na Ayuttaya, S., Chaktranond, C., Kreewatcharin, T., and Rattanadecho, P.
    "Comparison on Effect of Electrode Arrangements between Wire-to-Wire and Wire-to-plate Types on Swirling Flow under Electric Fields in a Channel Flow", The 2nd TSME-ICoME International Conference on Mechanical Engineering, 19-21 October 2011, Sheraton Krabi Beach Resort, Krabi, Thailand (TSF011)

  4. Akamphon,S. " Economic Performance of Solar Panel Installations with Heat Gain Reduction Benefit ", The 2nd TSME-ICoME International Conference on Mechanical Engineering, 19-21 October 2011, Sheraton Krabi Beach Resort, Krabi, Thailand.

  5. Phanumnuay, S., Pattamaprom, C. and Pakdee, W." Effects of incompletely converted palm oil on biodiesel quality and engine performance ", The 2nd TSME-ICoME International Conference on Mechanical Engineering, 19-21 October 2011, Sheraton Krabi Beach Resort, Krabi, Thailand.

  6. Vongpradubchai, S." The Microwave Processing of Banana Sliced by Using Multi-Feed Microwave Continuous Belt Drier ", The 2nd TSME-ICoME International Conference on Mechanical Engineering, 19-21 October 2011, Sheraton Krabi Beach Resort, Krabi, Thailand

  7. Kramutpijit, M., Yamtraipat, N.,and Rattanadecho,P. "A study of heat transport in unsaturated porous media involving vapor diffusion ", The 2nd TSME-ICoME International Conference on Mechanical Engineering, 19-21 October 2011, Sheraton Krabi Beach Resort, Krabi, Thailand

  8. Siriwitpreecha, A., Wessapan, T. and Rattanadecho, P. " Computational Analysis of SAR and Temperature Distributions in Human Body Exposed to Microwave ", The 2nd TSME-ICoME International Conference on Mechanical Engineering, 19-21 October 2011, Sheraton Krabi Beach Resort, Krabi, Thailand

  9. Pratumwal, Y., Limtrakarn, W. and Premvaranon, P. "The effect of blood flow past a stenotic carotid artery by using Computational Fluid Dynamics", The 2nd TSME-ICoME International Conference on Mechanical Engineering, 19-21 October 2011, Sheraton Krabi Beach Resort, Krabi, Thailand

  10. Achawakorn, K., Jearsiripongkul, T. and Fanchaeng, K. "The Effect of Pivot Bearing Assembly Process on Natural Frequency of Actuator Arm", The 2nd TSME-ICoME International Conference on Mechanical Engineering, 19-21 October 2011, Sheraton Krabi Beach Resort, Krabi, Thailand

  11. Rungroungdouyboon, B., et al.."The power added-on for manual wheelchair" Seoul International Invention Fair, 1-4 December 2011, South Korea (Grand Prize and Gold Prize)

  12. Rungroungdouyboon, B., et al.."Manual standing wheelchair for childen with cerebral palsy" Seoul International Invention Fair, 1-4 December 2011, South Korea (Bronze Prize)

  13. Rattanadecho, P., et al.."Comercialized drier processing using a combined unsymmetrical double-feed low power microwave and vacuum system" Seoul International Invention Fair, 1-4 December 2011, South Korea (Gold Prize)

  14. Rattanadecho, P. and Pongpakpien, S. "Portable digital readout microwave leakage detector" Seoul International Invention Fair, 1-4 December 2011, South Korea (Gold Prize)



2010
  1. Makul,N., Rattanadecho, P., Chatveera, B. and Agrawal D.K. Microstructures and Mechanical Properties of Portland Cement Pastes at Early Age Subjected to Microwave Accelerated-Curing with a Multi-Mode Cavity 1st TSME International Conference on Mechanical Engineering, 20-22 October, 2010, Ubon Ratchathani (AMM001)

  2. Chuchonak, M. and Rattanadecho, P. Experimental Analysis of the freezing process in unsaturated porous media Cooled from above (Influence of freezing temperature and initial water saturation) 1st TSME International Conference on Mechanical Engineering, 20-22 October, 2010, Ubon Ratchathani (TSF012)

  3. Suttisong, S. and Rattanadecho, P. The Experimental Investigation of Heat Transport and Water Infiltration in Granular Packed bed due to Supplied Hot Water (One Dimensional Models) 1st TSME International Conference on Mechanical Engineering, 20-22 October, 2010, Ubon Ratchathani (TSF011)

  4. Wessapan, T., Srisawatdhisukul, S. and Rattanadecho, P. The Effects of Dielectric Shield on Specific Absorption Rate and Heat Transfer in the Human Body Exposed to Microwave Energy 1st TSME International Conference on Mechanical Engineering, 20-22 October, 2010, Ubon Ratchathani (BME003)

  5. Saneewong Na Ayuttaya, S., Chaktranond, C. and Rattanadecho, P. Influence of Electrode Wire Structure on Corona Wind in a 2-D Rectangular Duct Flow (Numerical Analysis) 1st TSME International Conference on Mechanical Engineering, 20-22 October, 2010, Ubon Ratchathani

  6. Utaivorawit, N. and Pakdee, W. Mathematical Model in the Form of Vorticity-Stream Function for Combustion in Porous Media 1st TSME International Conference on Mechanical Engineering, 20-22 October, 2010, Ubon Ratchathani (TSF001)

  7. Akamphon,S., Sukkasi,S. and Boonyongmaneerat, Y. Cost Effectiveness Study of a Novel Hot-Dip Galvanizing Process 1st TSME International Conference on Mechanical Engineering, 20-22 October, 2010, Ubon Ratchathani (AMM006)
  8. Poapongsakorn, P. and Kanchanomai, C. Fracture Toughness of Closed-Cell Polymeric Foam under Mixed-Mode I/II Loading 1st TSME International Conference on Mechanical Engineering, 20-22 October, 2010, Ubon Ratchathani (AMM008)

  9. Limtrakarn, W. and Phakdeepinit, W. Biomechanics Study of Knee Ligament 1st TSME International Conference on Mechanical Engineering, 20-22 October, 2010, Ubon Ratchathani (BME006)

  10. Yimsiriwatana, N. and Jearsiripongkul, T. Airflow Simulation of Particle Suction in Hard Disk Drives Manufacturing Process 1st TSME International Conference on Mechanical Engineering, 20-22 October, 2010, Ubon Ratchathani (CST004)

  11. Santikunaporn, M., Tiraset, S., Nipakhonsompha, K., and Asavatesanupap, C. Transesterification of Lard to Biodiesel Using Two-Step Microwave 1st TSME International Conference on Mechanical Engineering, 20-22 October, 2010, Ubon Ratchathani (ETM006)

  12. Nuansirikomon, S., Limtrakarn, W., Kruenate, J., Phompan, W., and Sooksomsong, T. A study of die swell on virgin LDPE using CFD, 16th International Conference on Flow Injection Analysis, Thailand, 2010.

top

2009

  1. Asavatesanupap, C., M. Santikunaporn and P. Wangsakarn, "Energy conservation through value-engineering for SMEs in Thailand" The 5th European Conference Economics and Management of Energy in Industry Proceedings, April 2009, Vilamoura, Portugal.
     

  2. Santikunaporn, M., C. Asavatesanupap and P. Wangsakarn,"Energy Management for Designated Factories and Designated Buildings in Thailand" The 5th European Conference Economics and Management of Energy in Industry Proceedings, April 2009, Vilamoura, Portugal.

  3. Prukvilailert, M., P. Wangskarn, and C. Asavatesanupap, "Evaluation of the Participatory Energy Conservation for SMEs in Thailand" The Forth GMSARN International Conference 2009. Energy Security and Climate Change: Problems & Issue in GMS, 25-27 November 2009, Ha Long City, Vietnam.

  4. Wangskarn, P. and M. Prukvilailert, "A Building Energy Code for Designated Building in Thailand". The Forth GMSARN International Conference 2009. Energy Security and Climate Change: Problems & Issue in GMS, 25-27 November 2009, Ha Long City, Vietnam.

  5. Pakdee W. and P. Rattanadecho, Numerical model of microwave heating in a saturated non-uniform porosity medium using a rectangular waveguide. International Symposium on Engineering, Energy and Environment (ISEEE), 26-27 November 2009, Rayong, Thailand

  6. Chaktranond, C. and P. Doungsong, Energy saving in a domestic split-type air conditioner with evaporative cooling system. International Symposium on Engineering, Energy and Environment (ISEEE), 26-27 November 2009, Rayong, Thailand.

  7.  Suwannapum, N. and P. Rattanadecho, Numerical Analysis of Microwave and Air Convective Drying Process in Porous Packed Bed using a Rectangular Waveguide (Mode : TE10). International Symposium on Engineering, Energy and Environment (ISEEE), 26-27 November 2009, Rayong, Thailand.

  8. Akamphon, S. and K. Akamphon, Cost and Benefit Tradeoffs of Using Urban Tree Shades for Energy Saving in Buildings. International Symposium on Engineering, Energy and Environment (ISEEE), 26-27 November 2009, Rayong, Thailand.

  9. Asavatesanupap, C., T. Kiatpanomphae, N. Fuangsawasdi and M. Santikunaporn., "A Feasibility Study on Production of Solid Fuel from Glycerol and Agricultural Waste" International Symposium on Engineering, Energy and Environment (ISEEE), 26-27 November 2009, Rayong, Thailand.

  10. Puttanasak, P. and W. Limtrakarn, "Simulation of Air Ventilation and Temperature Distribution in Head Stack Assembly Clean Room using Computational Fluid Dynamics Technique", International Data Storage Technology Conference, Pathumthani, 2009.

  11. Chaktranond, C., and P. Rattanadecho, Heat and Mass Transfer Enhancement in Unsaturated Porous Packed beds subjected to Electrohydrodynamics (EHD). The 6th Asia-Pacific Drying Conference (ADC2009), 19-21 October 2009, Bangkok, Thailand.

  12. Vongpradubchai, S. and P. Rattanadecho,Microwave and Hot-Air Drying of Wood Using a Rectangular Waveguide. The 6th Asia-Pacific Drying Conference (ADC2009), 19-21 October 2009, Bangkok, Thailand.

  13. Wannapop, R. and T. Jearsiripongkul, "Study of Investigate Processing Parameters of Glass Fibre Reinforced Composite Pipes Produced by the Filament Winding Technique" International Symposium on Engineering, Energy and Environment (ISEEE), 26-27 November 2009, Rayong, Thailand.

  14. Achawakorn, K. and T. Jiasiripongkul, "Vibration Analysis in Cantilever Beam with Exponential Cross-Section Using Galerkins Method" International Symposium on Engineering, Energy and Environment (ISEEE), 26-27 November 2009, Rayong, Thailand.

  15. Achawakorn K, T. Phonpai and T. Jearsiripongkul., "Vibration Study of HSA with Different Excitation using LDV", International Data Storage Technology Conference 2009 (DST-CON2009), Bangkok, May 13-15, 2009.

  16. Chantasiriwan, S., "Method of Estimating Energy Saving by Variable-speed Control of Centrifugal Pump", IASTED International Conference on Power and Energy Systems, 12-14 October 2009, Beijing, China.

  17. Limtrakarn, W. and Namlaow, A. KI Stress Intensity Factor of Cracks with a Hard Inclusion by Finite Element Method and Reflection Photoelasticity Technique, International Conference on Experimental Mechanics (ICEM 2009), Singapore, 2009.

top

2008

  1. Reepolmaha, S., W. Limtrakarn and W. Uthaisang, "A prediction of endothelial temperature during phacoemulsification in five different solutions by finite element method", XXVI Congress of the European Society of Cataract and Refractive Surgeans, 2008.

  2. Limtrakarn, W., S. Nuansirikomol, Bunmongkolruksa and J. Kruenate, "Air Ventilation and Temperature Distribution in Strawberry Greenhouse by Computational Fluid Dynamics Analysis", 7th Asean ANSYS Conference: Inspiring Engineering, Singapore, 2008.

top

2007

(ҧǺ)

top

2006

  1. Jearsiripongkul T. "Minimal models of disk brake squeal. Technology and Innovation for Sustainable Development Conference (TISD2006)", Khon Kaen, 25-26 January, 2006.

  2. Jearsiripongkul T. and Hochlenert D. Disk Brake Squeal: Modeling and Active Control, IEEE International Conference on Robotics, Automation and Mechatronics (RAM 2006), Bangkok, Thailand, 7-9 June, 2006.

  3. Hochlenert, D., P. Hagedorn and T. Jearsiripongkul," Jordan canonical from approach to actively suppress disk brake squeal", The 8th International Conference on Motion and Vibration Control (MOVIC 2006), KAIST, Daejeon, Korea, August 27-30, 2006.

  4. S. Chantasiriwan, "Solution of the stationary three-dimensional Navier-Stokes equations by using radial basis functions and reducing the number of governing equations." ECCM 2006: III European Conference on Computational Mechanics, Lisbon, Portugal, 5-9 June 2006.

top

2005

  1. S. Chantasiriwan, "Comparison between multiquadric collocation method and finite difference method in solving the Poisson problem with stochastic boundary condition." Meshless 2005: ECCOMAS Thematic Conference on Meshless Methods, Lisbon, Portugal, 11-14 July 2005.

  2. Ratanadecho, P., "Numerical Analysis of Microwave Heating of Wood using a Rectangular Wave Guide (Influence of Frequency and Sample Size)" 4th Asia Pacific Drying Conference, 13-15, December, 2005, Kolkata, India.

top

2004

  1. Jearsiripongkul T. and P. Hagedorn, Parameter estimation of a floating caliper disk brake model with respect to squeal, Proc. Appl. Mech. 2004 (PAMM), Vol.4, Issue 1, pp.93-94, 2004.

  2. von Wagner, U. and T. Jearsiripongkul, D. Hochlenert and P. Hagedorn, Active control of brake squeal via smart pads, Proceeding of SAE 22nd Annual Brake Colloquium & Exhibition, Anaheim, LA, October 2004.

  3. S. Chantasiriwan, "Combined MFS-FDM for solving the diffusion-reaction equation." ISTP-15: International Symposium of Transport Phenomena, Bangkok, Thailand, 9-13 May 2004.

  4. Jearsiripongkul T., G. Chakraborty and P. Hagedorn, Stability analysis of a new model for floating caliper disk brake, Integrated Computer-Aided Engineering, Vol.11:1, pp.77-84, 2004.

  5. von Wagner U., T. Jearsiripongkul, D. Hochlenert and P. Hagedorn, Active control of brake squeal via smart pads, SAE 2004 Transactions Journal of Passenger Cars: Mechanical Systems, pp.1186-1192, 2004.

  6. Ratanadecho, P. and D. Atong, "Analysis of Microwave Thawing of Ice Layer Using a Microwave Oven." The 15th International Symposium on Transport Phenomena, 9-13 May, 2004, Bangkok, Thailand

  7. Atong, D., P. Ratanadecho, S. Vongpradubchai, S. Piyachote and N. Suwannapum, "Microwave Drying of a Slip Casting Operation for Tableware Product." The Third Thailand Materials Science and Technology Conference, 10-11 August, 2004, Bangkok, Thailand

  8. Chaktranond, C., K. Fukagata and N. Kasagi, Numerical simulation of the magnetic bead motion in a micro mixer for cell sorting, CFD 18th Symp., Dec 2004, Tokyo (CD-ROM), Paper No. C6-2.

  9. Fukagata, K., N. Kasagi and C. Chaktranond, Lagrangian chaos in a micro serpentine mixer for immunomagnetic cell sorting, Proc. Transport Phenomena in Micro and Nanodevices, October 2004, Kona Coast, Hawaii (CD-ROM), Paper No. ii-5.

  10. Chaktranond, C., K. Fukagata and N. Kasagi, Mixing enhancement in a micro serpentine conduit for cell sorting, Proc. 5th Int. Conf. on Multiphase Flow, May/June 2004, Yokohama, Paper No. 405.

top

2003

  1. Ratanadecho, P., "Experimental Validation a Combined Electromagnetic and Thermal-Moisture Model for a Microwave Drying of Multi-layered Porous Packed Bed inside a Rectangular Wave Guide." Fifth International Conference on Electromagnetic Wave Interaction with Water andMoist Substances (ISEMA 2003), Rotorua, Newzealand, 23-26 March, 2003.

  2. Zhou X., Pakdee W., and Mahalingam S. Large Eddy Simulation of Turbulent Nonpremixed Fames of Wood Pyrolysis Gas. (2003) 41st Aerospace Sciences Meeting and Exhibit 14-17 January Reno, NV, AIAA 2003-0961.

  3. Pakdee W., Zhou X., and Mahalingam S. A Detailed Examination of Turbulent Nonpremixed Fame Structure of Wood Pyrolysis Gas via Numerical Simulations. (2003) Proceedings of the Third Joint Meeting of the U.S. Sections of the Combustion Institute 16-19 March Chicago, IL.

  4. Rungroungdouyboon, B., Coulter, P.J., Nied, H.F., A numerical Simulation of Non-Homogenous Sheet Heating During Thermoforming Processes, Hawaii: JSME/ASME Material and Processing.

  5. Rungroungdouyboon, B., Coulter, P.J.,The Science Based Optimization of Material Heating During Thermoforming Processes, Nashville: ANTEC 2003.

  6. von Wagner U, Jearsiripongkul T., Chakraborty G and Hagedorn P. Brake squeal: Modeling and Experiments, VDI-Bericht 1749, pp.173-186, 2003.

  7. Jearsiripongkul T., Chakraborty G and Hagedorn P. Stability analysis of a floating caliper disk brake, Proc. Appl. Mech. 2003 (PAMM), Vol.2, Issue 1, pp.66-67, 2003.

  8. von Wagner U, Jearsiripongkul T., Chakraborty G and Hagedorn P. Brake squeal: Modeling and Experiments, VDI-Tagung Schwingungen in Antrieben 2003 Messung, Simulation, Beeinflussung und Ueberwachung, Fulda, April 2003.

  9. Aoki, K., Akahori, M. and Ratanadecho, P., "Drying of Layered Packed Beds, The 6th ASME-JSME Thermal Engineering Joint Conference" Hawaii, U.S.A., 16-20 March 2003

top

2002

  1. Jearsiripongkul T., Chakraborty G and Hagedorn P. Stability analysis of a new model for floating caliper disk brake, 2002 IEEE International Conference on Industrial Technology, Thailand, December 2002.

  2. Rungroungdouyboon, B., Coulter, P.J.,The Development and Validation of a Numerical Model for Non-Homogenous Sheet Heating During Thermoforming Processes, New Orleans 2002, ASME International Mechanical Engineering Congress and Exposition.

  3. Chakraborty G, Jearsiripongkul T., von Wagner U and Hagedorn P. A new model for a floating caliper disc-brake and active squeal control, VDI-Bericht 1736, pp.93-102, 2002.

  4. Chakraborty G, Jearsiripongkul T., von Wagner U and Hagedorn P. A new model for floating caliper disk brake, VDI-Tagung Reibung und Schwingungen in Fahrzeugen, Maschinen und Anlagen, Hannover, Germany, November 26-27, 2002.

  5. Aoki, K. Akahori, M. and Ratanadecho, P.,"Drying of Moisture Packed Bed Due to Microwave Heating Using a Rectangular Wave Guide." The 12th International Heat Transfer Conference (IHTC12), France, 2002

  6. Ratanadecho, P., "Numerical Modelling of Microwave Induced Natural Convection Inside a Rectangular Wave Guide." IEEE International Conference on Industrial Technology (ICIT02), Bangkok, Thailand, December 2002, pp. 474-479

  7. Kanchanomai, C.; Miyashita, Y.; Hosokai, Y; Mutoh, Y. "Effect of Alloying Element on Low Cycle Fatigue Behavior of Sn-Ag System Solders." Proceedings of the 8th International Fatigue Congress. Stockholm, Sweden, EMAS. 2002. Vol. 5, pp. 2847 - 2854.

  8. Kanchanomai, C.; Miyashita, Y.; Mutoh, Y. "C*-parameter Approach to Low Cycle Fatigue Crack Growth of Solders." Proceedings of the 4th Electronics Packaging Technology Conference, Singapore. IEEE Catalog No: 02EX566C. 2002. pp. 385 - 390.

  9. Marnadee, C. and Horio, H., Study on Fluidics as A Driving and Control Unit of Orchard Sprinkler Boat , Proceedings of International Symposium on Automation and Mechatronics of Agricultural and Bioproduction Systems (ISMAB), Taiwan, 486-492, 2002.

  10. Watanakul, N., Marnadee, C., and Horio, H., Preliminary Study on the Application of an Electric Sprinkler Boat , Proceedings of International Symposium on Automation and Mechatronics of Agricultural and Bioproduction Systems (ISMAB), Taiwan, 481-485, 2002

  11. Taechapairoj, C., Dhuchakallaya, I., Soponronnarit, S., Wetchacama, S. and Prachayawarakorn, S., 2002, "Fluidized Bed Paddy Drying Using Superheated Steam, " 13th International Drying Symposium Beijing, P. R. China.

  12. Taechapairoj, C., Dhuchakallaya, I., Soponronnarit, S., Wetchacama, S. and Prachayawarakorn, S., 2002, "Fluidized Bed Paddy Drying Using Superheated Steam, " 13th International Drying Symposium Beijing, P. R. China.

  13. Chantasiriwan, S., "Determination of heat transfer coefficient in axisymmetric system by inverse method. 16th National Mechanical Engineering Conference." King Mongkut's University of Technology Thonburi, Bangkok. 14-16 October, 2002. pp. 1-4.

  14. Marnadee, C. and Horio, H., Study on Fluidics as A Driving and Control Unit of Orchard Sprinkler Boat , Proceedings of International Symposium on Automation and Mechatronics of Agricultural and Bioproduction Systems (ISMAB), Taiwan, 486-492, 2002.

  15. Watanakul, N., Marnadee, C., and Horio, H., Preliminary Study on the Application of an Electric Sprinkler Boat , Proceedings of International Symposium on Automation and Mechatronics of Agricultural and Bioproduction Systems (ISMAB), Taiwan, 481-485, 2002.

  16. Pakdee W., Zhou X., and Mahalingam S. Direct and Large Eddy Simulation applied to Modeling of Combustion of Pyrolysis Gas. (2002) 40th Aerospace Sciences Meeting and Exhibit 14-17 January Reno, NV, AIAA 2002-1083.

top

2001

  1. S. Chantasiriwan, "An algorithm for inverse determination of thermal conductivity." CHT'01: Advances in Computational Heat Transfer II, Palm Cove, Queensland, Australia, 20-25 May 2001.

  2. Suraweth Krishnasreni, Pinai Thongsawatwong,Yuttana Kruahanchanpongse and Anuchit Chumsingh.2001.Design and Development on Oil palm Bunches Conveyor. International Conference: "20th ASEAN / 2nd APEC Seminar on Postharvest Technology". Lotus Pang Suan Kaew Hotel, Chaing Mai, Thailand. 11- 14 September 2001.

  3. S. Krishnasreni and P. Thongsawatwong, 2001. Status and trend of farm mechanization in Thailand. Proceedings; National Conference on Agricultural and Food. Mechanization.Malaysian Agricultural Research and Development Institute,Kualalumpur, Malaysia. 30-31 October. pp. 104-116.

  4. J. Zhao, S. Chantasiriwan, D. Maroudas, and F. Milstein, "Atomistic simulations of the mechanical response and modes of failure in metals at finite strain." 10th International Congress of Fracture, Honolulu, Hawaii, USA, December 2001

  5. Pakdee W., and Mahalingam S. Direct Numerical Simulations Analysis of Flame Surface Density for Diffusion Flame of Pyrolysis Gas. (2001) American Physical Society, 54th Annual Meeting of the Division of Fluid Dynamics November 18 - 20, 2001 San Diego, California Meeting ID: DFD01, abstract #FP.006

  6. S. Krishnasreni and P. Thongsawatwong, 2001. Status and trend of farm mechanization in Thailand. Proceedings; National Conference on Agricultural and Food. Mechanization.Malaysian Agricultural Research and Development Institute,Kualalumpur, Malaysia. 30-31 October. pp. 104-116.

  7. Parnichkun M, Pongern W and Jearsiripongkul T. "Development of a force-displacement controlled medical tele-analyzer", 2001 IEEE International Symposium on Industrial Electronics, Pusan, South Korea, 2001.

top

2000

  1. Pongern W, Jearsiripongkul T. and Parnichkun M. Development of force-displacement hybrid controlled system for industrial tele-monitor and control, Proceeding of the 2000 International Conference on Production Research, ICPR2000, Bangkok, Thailand, 2000.

  2. Cholaseuk, D., Srinivasan, V. and Modi, V., Robustness in optimum design of mechanical parts, Presented at the 2000 ASME Design Engineering Technical Conferences, Baltimore, Maryland. Paper number DETC2000/CIE-14652.

  3. Aoki, K. Akahori, M.and Ratanadecho, P., "Characteristics of Microwave Heating for Multi-Layered Materials Using a Rectangular Wave Guide."Proceeding of the 4 th JSME-KSME Thermal Engineering Conference, October 1-6, 2000, Kobe, pp. 191-196, Japan

top

1999
  1. Cholaseuk, D., Srinivasan, V. and Modi, V., Optimum design of fluid flow devices using Bezier curve and designed numerical experiment. Presented at the 1999 ASME Design Engineering Technical Conferences, Las Vegas, Nevada. Paper number DETC99/CIE-9116.

top

 

 

 Last update 09/15/2011

ҤԪǡͧ ǡʵ Է¸ʵ ٹѧԵ
Ţ 99 18 ¸Թ . ͧ˹ . ͧǧ . ҹ 12120
0-2564-3001 ֧ 9 3041, 3151 ῡ 3049 bnaowarat@engr.tu.ac.th ǻ䫵
http://me.engr.tu.ac.th